Epson ELPMB24 User Manual
3
English
Before Usage
This product is for mounting an Epson Multimedia Projector on a wall.
Features
This mount is for short throw projector EB-410W/PowerLite 410W.
Place to Install the Mount
Perform the power engineering work in advance to the place where the mount is installed.
Do not install the mount in places where it might be subjected to vibration or shock. It could cause damage to the projector
Do not install the mount in places where it might be subjected to vibration or shock. It could cause damage to the projector
or mounting surface. It could also cause this mount or the projector to fall and cause serious injury or even death.
Install the projector at a place away from other electric devices such as fluorescent lights or air conditioning. Some kinds of
fluorescent lights could interfere with the remote control of the projector.
It is recommended to keep connection cable length less than 20 meters to reduce the external noise.
Install the mount in place where there is less dust and humidity to prevent the lens or optical components from becoming
Install the mount in place where there is less dust and humidity to prevent the lens or optical components from becoming
dirty.
Do not install the mount at a place where the operating temperature for your projector might be exceeded. This type of
environment could damage the projector.
Do not use the mount when damaged.
Doing so could cause the arm unit to fall and cause serious injury or even death.
Never modify the mount.
Do not hang onto the mount. Or do not hang a heavy object on the mount.
It is dangerous if the mount falls down. If the projector or the arm unit falls down, it could cause serious injury or even death.
Stop using this mount and contact the customer support office listed on Epson Projector Contact List in the User's Guide
of your projector when the following trouble occurs.
of your projector when the following trouble occurs.
• Drop and damage this mount when installing.
• The arm comes down.
• The arm comes down.
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on the mount, the case may
crack and this could cause the projector to fall. It could cause personal injury or property damage. Do not use adhesives,
lubricants or oils to install or adjust the mount.
crack and this could cause the projector to fall. It could cause personal injury or property damage. Do not use adhesives,
lubricants or oils to install or adjust the mount.
Tighten all screws firmly after adjustment.
If the screws are not properly tightened, it could cause the projector to fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation. Confirm that the screws have not become loosened on a regular basis.
If you find any loose, tighten the screws firmly.
If you find any loose, tighten the screws firmly.
If the screws are not properly tightened, it could cause the projector to fall and cause personal injury or property damage.
Do not use in places where the humidity is high.
High humidity could cause fire or electric shock.
Do not install at place where there is a lot of dust, or a place where it may come into contact with smoke or stream such as
near cooking appliances or a humidifier.
near cooking appliances or a humidifier.
These could cause fire or electric shock.
Do not change the angle of this mount or the projector with too much force.
Too much force could damage the mount and could cause personal injury.
Warning
Caution