Infinity BETA C250 Beech BETAC250 User Manual

Product codes
BETAC250
Page of 8
3
BETA SPEAKER SYSTEMS
I
NSTALLING
F
EET
Beta 40 and Beta 50
These models feature four rubber feet that enable them to be placed on a
smooth-surfaced floor, such as tile or hardwood. Four metal spikes are
supplied for use when the speaker is to be placed on a carpeted surface
to decouple the speaker from the floor and prevent unwanted damping. To
insert the spikes, gently lay the speaker on its side (not its front or back)
on a soft, nonabrasive surface. Each spike screws into the threaded insert
in the center of each rubber foot. Make sure all four spikes are screwed
in completely for stability.
NEVER drag the speaker to move it, as this will damage the spikes, the
feet and/or the wood cabinet itself. Always lift the speaker and carry it to
its new location.
CAUTION: Floorstanding (tower) loudspeakers have a high center of gravity
and may become unstable and tip over during earthquakes, or if rocked,
tipped or improperly positioned. If this is a concern, these speakers should
be anchored to the wall behind them, using the same procedures and
hardware customary for anchoring bookcases and wall units.The customer
is responsible for proper installation and proper selection of hardware.