Avaya CIB 3236 Leaflet

PARTNER is a registered trademark of Avaya Inc. in the U.S. and other countries.

The Port Card may be installed in the PARTNER Messaging module when the communications system's
power is on or off. Follow the applicable set of instructions below:

Communications System's Power Is Off

1. Hold the Port Card with the front label facing to the right and slide it gently into Card Slot 1 (the

leftmost card slot) on the PARTNER Messaging module. When inserted properly, the Port Card
projects out about 1½” from the module, and the letter “e” in the word “Messaging” (on the Port Card’s
label) is approximately aligned with the edge of the module.

2. Power up the communications system.

3. PARTNER Messaging starts up.

4. Check the LED on the front of the PARTNER Messaging module. The LED will blink several times

and at different rates.

5. The System Status LED will turn steady green when the PARTNER Messaging system has

successfully started.

NOTE:
If the LED is off, steady red, or steady amber, remove the Port Card and reinsert it. If the condition
persists, contact your local Authorized Dealer or call the Avaya Technical Services Center toll-free on
1.800.628.2888.

Communications System's Power Is On

1. If one is already installed, remove the Port Card from the PARTNER Messaging module.

2. To insert the Port Card, hold it with the front label facing to the right and slide it gently into Card Slot 1

(the leftmost card slot) on the PARTNER Messaging module. When inserted properly, the Port Card
projects out about 1½” from the module, and the letter “e” in the word “Messaging” (on the Port Card’s
label) is approximately aligned with the edge of the module.

3. Check the LED on the front of the PARTNER Messaging module. The LED will blink several times

and at different rates.

4. The LED will turn steady green when the messaging system has successfully restarted.