Thomson CS100 Micro system CS100 User Manual

4

Thomson models show time in 24-hour standard.

1. Press CLOCK•TIMER to enter clock setting

mode.  CLK XX:XX will show on the display.

2. Press TUNING - or + to set the hour.
3. Press PROG•SET•CLEAR to shift to the minute

digits.

4. Press TUNING - or + to set the minute.
5. Press PROG•SET•CLEAR to confirm the

setting.

1.  Press CLOCK•TIMER twice to enter timer on

 setting mode.  ON XX:XX will show on the
 display.

2.  Press TUNING - or + to set the hour.
3.  Press PROG•SET•CLEAR to move to the

minute digits.

4.  Press TUNING - or + to set the minute digits.
5.  Press PROG•SET•CLEAR to move to source

selection.

6.  Press TUNING - or + to select source (Tape /

 Tuner / CD / Rec TU)

7.  Press PROG•SET•CLEAR to move to volume

setting.

8.  Press TUNING - or + to select desired volume

 level.

9.  Press PROG•SET•CLEAR to move to timer off

time setting.  OFF XX:XX will show on the
display.

10. Repeat steps 3-5 to set timer off hour and

  minute.

11. Press PROG•SET•CLEAR to confirm settings.

Timer will be activated automatically after
settings are finished.

Press and hold CLOCK•TIMER for 2 seconds on
the main unit to activate and deactivate the timer
function.

If clock time is not set, SET CLK will flash on the
display when you try to activate the timer. Follow
instructions under “Setting Clock Time” to set
clock.

If timer settings have not been entered, SET TMR
will flash on the display when you try to activate
the timer.  Follow instructions under ”Setting the
Timer” to enter timer settings.

If timer off time is set as the same as timer on
time, TIMER NG will flash on the display.  Set the
correct timer off time again.

Press SLEEP on the remote control to toggle
among OFF, 90, 80, 70, 60, 50, 40, 30, 20, and 10
minutes.

Press EQ to toggle among FLAT, CLASS, ROCK, POP
and JAZZ.

Press X-BASS to turn on/off the x-bass feature.

Press MUTE to silence playback.

Untitled-4

4/10/03, 1:57 PM

9