Avaya G350 User Manual

Page of 60
Before you start
Gathering information
14
Installation of the G350 Media Gateway
December 2003
Staging
If you are using this guide to take you through staging the G350, work through the guide as follows:
1
 on page 23, and install the media modules in the G350 
chassis. 
2
 on page 31, and apply power to the G350.
3
Have the G350 configured and tested by a supporting technician. Do not connect a modem for the 
configuration. Read 
4
Disconnect from the G350 any external equipment used in the configuration and testing process.
5
Disconnect power from the G350 and pack it up with the media modules installed.
Installation of a staged G350
If you receive the G350 after staging, pre-configured with the media modules already installed, work 
through the guide as follows:
1
 on page 19, and mount the G350 with the media modules 
already installed.
2
 on page 31, and apply power to the G350.
3
 and connect devices to the G350.
4
 and test the installation.
Gathering information
Before you begin the installation, read the planning documentation.
The planning documentation provides you with information about: 
What media modules you will be installing. Take note of whether or not you are installing an 
S8300 Media Server module. The installation process is different depending on whether or not 
you are installing an S8300.
Which voice devices and data devices need to be connected to the G350.
Whom to contact on site about delivery, system questions, or network concerns.
Whom to contact at your home office in case of questions.
Whether you need a special pass or an escort.
How to gain entrance to the installation location if it is locked.
Where to install equipment.
Where to find a telephone near the installation location.