Avaya G350 User Manual

Step 1: Prepare configuration equipment

The configuration of the G350 will be performed by one or more supporting technicians either remotely 
or on-site. This chapter explains what preparations to make so that the supporting technicians can 
configure the G350.

If you received the G350 with the media modules pre-installed, the G350 is already 
configured, and you should skip this chapter.

When you have mounted the G350 and inserted the media modules, you are ready to connect endpoint 
devices to the front panel ports. Before you connect devices, make the preparations described in this 
chapter to enable the supporting technician to access the G350 for configuration. The supporting 
technician can start to configure the G350 while you connect devices. 

If you are staging the G350 before taking it to the customer site, do not connect endpoint 
devices unless the supporting technician requests you to do so to assist the configuration. 
The supporting technician will need to connect some devices to test endpoints. 

When you have completed the preparations described in this chapter, contact the supporting technician to 
help establish configuration access. Be prepared to assist the supporting technician throughout the 
configuration. For information about how you might need to assist in the configuration, see 

 on page 40. While the supporting technician is configuring the G350, you can connect 

endpoint devices to the G350. For information about connecting devices to the front panel ports of the 
G350, see 

. The supporting technician will need you to connect the 

endpoint devices so that he can test the configuration.

If the configuration will be done on-site, no preparations are necessary. You will need to assist the 
supporting technician throughout the configuration (see 

 on page 40).

If you are having the G350 staged, skip to 

If the configuration will be done either remotely, or partly remotely and partly on-site, you need to 
prepare certain equipment for use in the configuration process.

If a supporting technician who will be performing part of the configuration is coming to 
do so on-site, that technician might do these preparations.

The preparations are different depending on whether or not you installed an S8300 in the G350. See one 
of the following sections below: