Avaya G350 User Manual

Preparing for configuration
Step 1: Prepare configuration equipment

Select Enable the modem and continue the installation remotely. The Connect Modem screen 
appears:

Click Finish.

Connect a serial modem to a working telephone line.

Connect the provided DB-25 adapter to the modem.

Disconnect the flat cable from the COM port of the laptop computer.

Connect the flat cable to the DB-25 connector on the modem.

The G350 is now prepared for remote configuration via the modem. See 

on page 40) for information about how you will need to assist the supporting technician to configure the 
G350 from a remote location.

If you installed an S8300 in the G350 and all the configuration will be done on-site, the G350 is ready for 
the supporting technician to set up the G350 for configuration and perform the configuration. You will 
need to assist the technician (see 

If you installed an S8300 in the G350, and some or all of the configuration will be done remotely (see 

 on page 40) prepare for configuration as follows:

Connect and enable the USB modem. See 

If the supporting technician requires a USB CD-ROM drive to download software upgrades, 
connect the USB CD-ROM drive to the remaining available USB port on the S8300 module.