Apple DPR2320TM User Manual

14 

 

 

1. Click 

Start, select Settings, and choose Network and Dial-up 

Connections.  

2. Double-click 

the 

Local Area Connection icon in the Network and Dial-up 

Connections window.  

3. Click Properties in the Local Area Connection Status window.  

4. Click 

Internet Protocol (TCP/IP) in the Local Area Connection Properties 

window, and then click Properties.  

5. Select 

both Obtain an IP address automatically and Obtain DNS 

server address automatically in the Internet Protocol (TCP/IP) 
Properties window, and then click OK. 

6. Click 

Yes to restart your computer when the Local Network window 

opens. The computer restarts. The TCP/IP protocol is now configured on 
your PC and your Ethernet devices are ready for use. 

7. 

Try to access the Internet. If you cannot access the Internet, go to 
Having Difficulty, later in this guide. If you still cannot access the 
Internet, contact your cable service provider for further assistance. 

 

1. Click 

Start, select Connect to, and choose Show all connections.  

2. Double-click 

the 

Local Area Connection icon in the LAN or High-Speed 

Internet section of the Network Connections window.  

3. Click Properties in the Local Area Connection Status window. 

4. Click 

Internet Protocol (TCP/IP), and then click Properties in the Local 

Area Connection Properties window. 

5. Select 

both Obtain an IP address automatically and Obtain DNS 

server address automatically in the Internet Protocol (TCP/IP) 
Properties window, and then click OK. 

6. Click 

Yes to restart your computer when the Local Network window 

opens. The computer restarts. The TCP/IP protocol is now configured on 
your PC and your Ethernet devices are ready for use. 

7. 

Try to access the Internet. If you cannot access the Internet, go to 
Having Difficulty, later in this guide. If you still cannot access the 
Internet, contact your cable service provider for further assistance.