Apple DPR2320TM User Manual

 

 

The following table provides a description of the pages available from within the 
Wireless section of the Setup page. 

 

Basic 

Use this page to configure your wireless access 
point (WAP) parameters, including service set 
identifier (SSID) and channel number 

Privacy 

Use this page to configure your WAP wired 
equivalent privacy (WEP) encryption keys and 
authentication. Using encryption and 
authentication prevents unauthorized access to 
your wireless devices 

Access Control 

Use this page to configure the WAP to restrict 
access to only selected wireless client devices. 
Authorized clients are selected by MAC address. 
Use this page to select Open System or Share 
Key authentication and to enable and disable 
broadcast of the WAP SSID 

Advanced 

Use this page to configure your WAP data rates 
and wireless fidelity (WiFi) thresholds 

Use the Basic Settings - Password Settings page to set up a password to restrict 
unauthorized persons from accessing to your gateway cable modem settings. 
Click Password Settings in the Basic Settings section of the Setup page to 
access the Password Settings page.  

 Your gateway modem comes from the factory with no password enabled. 

We highly recommend that you set up a user password to prevent unauthorized 
users from modifying the settings of your network. 

 If you do choose to set up a password, use a password that you can easily 

remember. Do not forget your password.