Avaya Wireless AP-3 User Manual

Avaya Wireless AP-3 User’s Guide                                                                                 7-15

4. Try using a different Ethernet cable – if it works, there is probably a 

faulty connection over the long cable, or a bad RJ-45 connection.

5. Check power plug and hub.

6. If the Ethernet link goes down, check the cable, cable type, switch, 

and hub.

1. Verify that the indicator for the port is “on.”

2. Verify that the AE hub is connected to the Ethernet network with a 

good connection.

3. Verify that the Ethernet cable is Category 5 or better and is less 

than 100 meters (approximately 325 feet) in length from the 
Ethernet source to the AP.

4. Try to connect a different device to the same port on the AE hub – 

if it works and a link is established, there is probably a faulty data 
link in the AP.

5. Try to re-connect the AP to a different output port (remember to 

move the input port accordingly) – if it works, there is probably a 
faulty output or input port in the AE hub or a bad RJ-45 connection.