Avaya Wireless AP-3 User Manual
Set Basic Configuration Parameters
A-42 Avaya Wireless AP-3 User’s Guide
Set WEP Encryption for the Wireless Interface
!
CAUTION:
Wireless clients must be configured with the same encryption key to be
able to communicate with the AP. The AP can only support one Key
Length (so each of the configured keys must have the same length). The
available key sizes vary based on the Access Point’s model. See
able to communicate with the AP. The AP can only support one Key
Length (so each of the configured keys must have the same length). The
available key sizes vary based on the Access Point’s model. See
for more information.
You can set up to four encryption keys. This example describes setting
encryption Key 1 on the wireless card in Slot A (if applicable; a
Single-radio AP uses index 3; a Dual-radio AP uses index 3 for Slot A and
index 4 for Slot B).
encryption Key 1 on the wireless card in Slot A (if applicable; a
Single-radio AP uses index 3; a Dual-radio AP uses index 3 for Slot A and
index 4 for Slot B).
[Device Name]>set wifsec 3 encryptstatus enable encryptkey1 <WEP
key (number of characters vary depending on AP model)>
encryptkeytx key1
encryptkeytx key1
[Device Name]>show wifsec