Avaya Wireless AP-3 User Manual

Avaya Wireless AP-3 User’s Guide                                                                                 2-21

1. Locate the unit’s Ethernet MAC address and write it down for future 

reference. The MAC address is printed on the product label. Each 
unit has a unique MAC address, which is assigned at the factory.

2. Confirm that the AP is connected to the same LAN subnet as the 

computer that you will use to configure the AP.

3. Power up, reboot, or reset the AP.

— Result: The unit requests an IP Address from the network 

DHCP server.

4. Insert the Installation CD into the CD-ROM drive of the computer 

that you will use to configure the AP.

— Result: The installation program will launch automatically.

5. Follow the on-screen instructions to install the Access Point 

software and documentation.

NOTE:
The Avaya Wireless Installation program supports the following 
operating systems:

— Windows 98SE

— Windows 2000

— Windows Me

— Windows XP

6. After the software has been installed, double-click the ScanTool 

icon on the Windows desktop to launch the program (if the 
program is not already running).