Avaya Wireless AP-3 User Manual
Configuring the AP Using the HTTP Interface
Avaya Wireless AP-3 User’s Guide 4-3
3. Enter the Access Point’s IP address in the browser’s Address field
and press Enter.
— Result: The Enter Network Password screen appears.
4. Enter the HTTP password in the Password field and click OK.
Leave the User Name field blank. (By default, the HTTP password
is “public”).
is “public”).
— Result: The System Status screen appears.
Figure 4-1. Enter Network Password Screen
5. Click the Configure button located on the left-hand side of the
screen.