Asante Technologies 10/100 User Manual
Page 3-3
Installing Network Specific Drivers
8
Remove the Driver Disk from the floppy drive.
9
Restart your computer.
10
To run NetWare, type the following four commands, (in the fol-
lowing sequence) at the
lowing sequence) at the
C:\NETWARE
prompt:
LSL
ASANTPCI
IPXODI
NETX
11
Change to the network drive (usually F), and log in to your net-
work.
work.
Novell NetWare 4.x Client
This section shows you how to install Novell NetWare version 4.x client soft-
ware.
ware.
1
Run the NetWare Client Install program that came with Netware
4.x. Follow the instructions for the first three steps of the Net-
Ware Client Install program as required.
4.x. Follow the instructions for the first three steps of the Net-
Ware Client Install program as required.
2
At step 4, press Enter to install the driver for your adapter.
3
When prompted, insert the Asanté Driver Disk into the drive and
type the following:
type the following:
A:\NETWARE\NW4.X\CLIENT
4
Press Enter.
The Network Board window appears.
5
Select Asanté PCI Network Adapter and press Enter.
The Settings for the Asanté PCI Network Adapter window
appears. It displays the selected settings for Base I/O Port, Hard-
ware Interrupt, and Media Frame Type. You do not need to mod-
ify these settings.
appears. It displays the selected settings for Base I/O Port, Hard-
ware Interrupt, and Media Frame Type. You do not need to mod-
ify these settings.
6
Press ESC to continue.
7
At step 5, press Enter to continue with the NetWare installation.