B&B Electronics 232PCC2 User Manual
Documentation Number 232PCC23799 Manual
5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445
•
Reboot the system and note the message displayed when
the 232PCC2 Client Driver is loaded. If the Client Driver
reports an "invalid command line option", correct the entry
in the CONFIG.SYS file and reboot the system again. If
the Client Driver reports "Card and Socket Services not
found", a version of Card and Socket Services must be
installed on the system or the 232PCC2 Enabler program
must be used to configure the adapter. If the Client Driver
reports the desired adapter configuration, the installation
process is complete and the 232PCC2 may be removed
and / or inserted from the system as desired. On each
insertion into the PCMCIA socket, the 232PCC2 will be
automatically re-configured according to the command
line options.
reports an "invalid command line option", correct the entry
in the CONFIG.SYS file and reboot the system again. If
the Client Driver reports "Card and Socket Services not
found", a version of Card and Socket Services must be
installed on the system or the 232PCC2 Enabler program
must be used to configure the adapter. If the Client Driver
reports the desired adapter configuration, the installation
process is complete and the 232PCC2 may be removed
and / or inserted from the system as desired. On each
insertion into the PCMCIA socket, the 232PCC2 will be
automatically re-configured according to the command
line options.
Command Line Options
The 232PCC2 Client Driver accepts up to eight command line
arguments from the user to determine the configuration of the
232PCC2. If any arguments are provided, the Client Driver will
attempt to configure any 232PCC2s with the options specified in the
order they are entered on the command line. Each argument must
be enclosed in parenthesis and must be separated from other
arguments by a space on the command line. Within each argument,
any or all of the following parameters may be specified using a
comma (no spaces) to separate each parameter:
232PCC2. If any arguments are provided, the Client Driver will
attempt to configure any 232PCC2s with the options specified in the
order they are entered on the command line. Each argument must
be enclosed in parenthesis and must be separated from other
arguments by a space on the command line. Within each argument,
any or all of the following parameters may be specified using a
comma (no spaces) to separate each parameter:
Baddress
specifies the base I/O address of the 232PCC2 in
hexadecimal and must reside on an even 16-byte
(10H) boundary. This option must be omitted if using
the Dmode option. If both the Dmode and Baddress
option are omitted, Card and Socket Services will
assign a block mode base address.
hexadecimal and must reside on an even 16-byte
(10H) boundary. This option must be omitted if using
the Dmode option. If both the Dmode and Baddress
option are omitted, Card and Socket Services will
assign a block mode base address.
Dmode
specifies a COM mode base I/O address configuration
for the 232PCC2. The D1 option configures the
232PCC2at COM1/COM3 (3F8/3E8), and the D2
option configures the 232PCC2 at COM2/COM4
(2F8/2E8). This option must be omitted if using the
Baddress option. If both the Dmode and Baddress
options are omitted, Card and Socket Services will
assign a block mode base address.
for the 232PCC2. The D1 option configures the
232PCC2at COM1/COM3 (3F8/3E8), and the D2
option configures the 232PCC2 at COM2/COM4
(2F8/2E8). This option must be omitted if using the
Baddress option. If both the Dmode and Baddress
options are omitted, Card and Socket Services will
assign a block mode base address.