Avocent AutoView 1500 KVM Switch AV1500-202 Manual
Product codes
AV1500-202
Chapter 3: Basic Operations 21
To assign names to servers:
1.
In the Names dialog box, select a server name or port number and click Modify. The Name
Modify dialog box displays.
Modify dialog box displays.
Figure 3.4: Name Modify Dialog Box
2.
Type a name in the New Name box. Names of servers may be up to 15 characters long. Supported
characters include: A to Z, a to z, 0 to 9, space and hyphen.
characters include: A to Z, a to z, 0 to 9, space and hyphen.
3.
Click OK to transfer the new name to the Names dialog box. Your selection is not saved until
you click OK in the Names dialog box.
you click OK in the Names dialog box.
4.
Repeat steps 1 to 3 for each server in the system.
5.
Click OK in the Names dialog box to save your changes.
-or-
Click X or press
-or-
Click X or press
Escape
to exit the dialog box without saving changes.
NOTE: If an AVRIQ module has not been assigned a name, the EID is used as the default name.
Assigning device types
The AutoView switch automatically discovers cascaded KVM switches, but you will need to specify
the number of ports on the cascaded switch through the Devices dialog box. You will see an Sw-8 or
Sw-24 display in the Type category for the cascaded switch. Select the switch from the list and the
Modify button displays, allowing you to assign it the appropriate number of ports.
the number of ports on the cascaded switch through the Devices dialog box. You will see an Sw-8 or
Sw-24 display in the Type category for the cascaded switch. Select the switch from the list and the
Modify button displays, allowing you to assign it the appropriate number of ports.
NOTE: The Modify button will only be available if a configurable switch is selected.
To access the Devices dialog box:
1. Press
Print Screen
to launch the OSCAR interface. The Main dialog box will appear.
2. Click Setup - Devices. The Devices dialog box displays.