Cabletron Systems EMC39-12 User Manual
EMC39-12 User’s Guide
Page 2-1
CHAPTER 2
INSTALLATION
This chapter explains how to install the EMC39-12 in a 19-inch rack and
also provides requirements for installing the EMC39-12 on a tabletop or
shelf.
also provides requirements for installing the EMC39-12 on a tabletop or
shelf.
2.1 UNPACKING THE EMC39-12
Unpack the EMC39-12 as follows:
1. Remove the shipping box material covering the EMC39-12.
2. Carefully remove the EMC39-12 from the shipping box.
3. Remove the EMC39-12 from its non-conductive bag. If you notice any
signs of damage, contact Cabletron Systems Technical Support
immediately.
immediately.
2.2 INSTALLING THE EMC39-12
You can install the EMC39-12 in a 19-inch rack or place it on any
horizontal surface (e.g. a table or shelf). Cabletron Systems provides an
accessory kit with the EMC39-12 that includes Rackmount Brackets and
Mounting Screws.
horizontal surface (e.g. a table or shelf). Cabletron Systems provides an
accessory kit with the EMC39-12 that includes Rackmount Brackets and
Mounting Screws.
The following sections provide instructions for installing the EMC39-12.
Select one of the following subsections and perform the steps that are
applicable to your installation needs.
Select one of the following subsections and perform the steps that are
applicable to your installation needs.
!
CAUTION
Do not remove the cover from the EMC39-12. There are no
user configurable devices inside and the electronics are static
sensitive.
user configurable devices inside and the electronics are static
sensitive.
emc39bk Page 1 Monday, February 12, 1996 4:21 PM