Cabletron Systems 802.1Q User Manual

To add or delete ports from a VLAN, proceed as follows:

Use the arrow keys to highlight the Port field.

Press the SPACE bar to step to the appropriate port number. The 
associated protocol is displayed for that port.

Use the arrow keys to highlight the DELETE ALL PORTS field.

Press the SPACE bar to step to the appropriate selection to ADD 
PORT, ADD ALL PORTS, DELETE PORT, or DELETE ALL PORTS 
from the VLAN ID shown in the VLAN ID field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen.

Press ENTER. The message “SAVED OK” displays and the settings 
are saved.

The procedures below provide a short tutorial walkthrough that presents 
each of the steps necessary to configure a new VLAN, assign a port to it, 
and check the Port VLAN List of the port. You may wish to follow this 
walkthrough from start to finish before attempting to configure your own 
VLANs.

This walkthrough begins at the 802.1Q VLAN Configuration Menu 
screen for a 6C105 chassis. Follow the instructions in your device user’s 
guide to navigate to this Local Management screen. 

On the 802.1Q VLAN Configuration Menu screen, use the arrow keys 
to highlight the DEVICE VLAN CONFIGURATION menu item. 
Press ENTER. The Device VLAN Configuration screen displays.

In this walkthrough, we will not change the setting of the Forward 
Default VLAN Out All Ports fields from their default setting of NO.

The screens displayed by your devices may be marginally 
different from those shown in the illustrations for this 
walkthrough.