Billion Electric Company 30 User Manual
34
password for security reason.
4. Prepare to physically connect BiGuard 30 to Cable or DSL modems and a
computer.
Be sure to also review the Safety Warnings located in the preface of this manual
before working with your BiGuard 30.
4. Prepare to physically connect BiGuard 30 to Cable or DSL modems and a
computer.
Be sure to also review the Safety Warnings located in the preface of this manual
before working with your BiGuard 30.
3.3 Connecting Your Router
Connecting BiGuard 30 is an easy three-step process:
1. Connect BiGuard 30 to your LAN by connecting Ethernet cables from your
networked PCs to the LAN ports on the router. Connect BiGuard 30 to your
broadband Internet connection via router’s WAN port.
1. Connect BiGuard 30 to your LAN by connecting Ethernet cables from your
networked PCs to the LAN ports on the router. Connect BiGuard 30 to your
broadband Internet connection via router’s WAN port.
2. Plug BiGuard 30 to an AC outlet with the included AC Power Adapter.
3. Ensure that the Power and WAN LEDs are solidly lit, and that on any LAN port that
has an Ethernet cable plugged in the LED is also solidly lit. The Status LED will
remain solid as the device boots. Once the boot sequence is complete, the LED will
shut off, indicating that BiGuard 30 is ready.
If the router does not power on, please refer to Chapter 5: Troubleshooting for
possible solutions.
possible solutions.