Billion Electric Company 30 User Manual

 

 

87

 

 
Username: Enter your user name. 
Password: Enter your password. 
Retype Password: Retype your password. 
Login Server: Enter the IP of the Login server provided by your ISP. 
MAC Address: If your ISP requires you to input a WAN Ethernet MAC, check the 
checkbox and enter your MAC address in the blanks below. 
Candidates: You can also select the MAC address from the list in the Candidates. 
DNS: If your ISP requires you to manually setup DNS settings, check the checkbox 
and enter your primary and secondary DNS. 
RIP: To activate RIP, select Send, Receive, or Both from the drop down menu. To 
disable RIP, select Disable from the drop down menu. 
MTU: Enter the Maximum Transmission Unit (MTU) for your network. 
Network Address Translation: Enables or Disables the NAT function. To apply this 
interface as router mode please select Disable. Due to default firewall feature, if you 
would like to use router mode, you have to input the packet filter rules you would 
like to forward in Configuration -> Firewall -> Packet filter 
 
Click Apply to save your changes. To reset to defaults, click Reset. 
 
A simpler alternative is to select Quick Start from the main menu. Please see the 
Quick Start section of this chapter for more information. 

 

4.4.2.2  Bandwidth Settings 
 
Under Bandwidth Settings, you can easily configure both inbound and outbound