Avocent CCM User Manual
Chapter 5: CCM Appliance Commands 89
Access right: USER
Access level: ADMIN (may log out all except APPLIANCEADMIN) or APPLIANCEADMIN
Access level: ADMIN (may log out all except APPLIANCEADMIN) or APPLIANCEADMIN
Syntax
USER LOGOUT <username>
User Set command
The User Set command changes a user’s configuration in the user database. For more information,
see Managing User Accounts on page 27 and Access rights and levels on page 28.
You may delete a user’s password or key; however, each user must have a password or a key, so
you cannot remove both. Also, you cannot remove a user’s password or key if that action would
result in no users having USER access rights.
Access right: none to change your own password, USER to change anything else
Access level: none to change your own password, ADMIN or APPLIANCEADMIN to change
anything else
see Managing User Accounts on page 27 and Access rights and levels on page 28.
You may delete a user’s password or key; however, each user must have a password or a key, so
you cannot remove both. Also, you cannot remove a user’s password or key if that action would
result in no users having USER access rights.
Access right: none to change your own password, USER to change anything else
Access level: none to change your own password, ADMIN or APPLIANCEADMIN to change
anything else
Syntax
USER SET <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>] [GROUP=<group>]
[KEY=<sshkey>] [ACCESS=<access>] [GROUP=<group>]
Table 5.44: User Logout Command Parameter
Parameter
Description
<username>
Username to be logged out.
Table 5.45: User Set Command Parameters
Parameter
Description
<username>
Username. This parameter may be omitted only if you are modifying your
own password.
own password.
PASSWORD=<pwd>
New 3-16 alphanumeric character password. Passwords are case sensitive. This
parameter is required when changing another user’s password.
The password is displayed on the screen. For security, clear your screen display
after issuing this command.
To delete a password, specify Password =“”.
parameter is required when changing another user’s password.
The password is displayed on the screen. For security, clear your screen display
after issuing this command.
To delete a password, specify Password =“”.
SSHKEY=<keyfile>
Name of uuencoded public key file on an FTP server. The maximum file size that
may be received is 4K bytes.
may be received is 4K bytes.
FTPIP=<ftpadd>
FTP server’s IP address.
KEY=<sshkey>
Uuencoded SSH key. To delete an SSH key (whether it was originally specified with
the SSHKEY and FTPIP parameters or with the KEY parameter), specify Key=“”.
the SSHKEY and FTPIP parameters or with the KEY parameter), specify Key=“”.