Campbell Hausfeld SDM-CAN User Manual
SDM-CAN CAN-Bus Interface User Guide
For downloading software you will need the following:
• A recent copy of Campbell Scientific’s CSOS operating system download
program
• A copy of the SDM-CAN operating system (copied to your hard-disk)
• A PC running Microsoft Windows
• A serial cable (as described above).
• A PC running Microsoft Windows
• A serial cable (as described above).
The SDM-CAN also requires a 12V power supply, but does not have to be
connected to a datalogger.
connected to a datalogger.
To load the new operating system take the following steps:
• Run the CSOS software and set up the communications parameters to specify
the COM port to which the SDM-CAN is connected.
• Select the file containing the new operating system and then follow the
instructions given. This will normally involve following a sequence of turning
the module off and then on whilst starting the download process from the PC.
the module off and then on whilst starting the download process from the PC.
• Wait until the process has completely finished and reports a successful
upgrade before removing power from the SDM-CAN or quitting CSOS.
5-4