Sanyo POA-PN02 User Manual

Network Unit

OWNER’S MANUAL

Image Adjustment

This function is to adjust the projected picture image and set the image
mode. For selection of image mode, select a desired image mode with the
Image pull-down menu button and then click Set button. The setting items

are switched automatically according to selected input mode, computer or video
input. To change the setting of each page, click Set button on each page. When click-
ing Reset button, all of the contents of the pages are reset.

* Some control items can not be used depending on the selecting input mode or functions of

the projector you use. In this case, the values of those items are indicated with “---”.

Image ..................Selects image mode among

the Standard, Real*, Cinema**,
Image1 to Image4 with pull-
down button menu . Image1 to
4 are user preset mode.

Original Mode ........Displays which predefined

image adjustment mode is
based upon.

Adjustment
items ..................

Contrast, Brightness, Color, Tint

* This item is only available in the computer input

mode.

** This item is only available in the video input mode.

White Balance

Color Temp. ......Sets a color temperature

mode.

Red, green, 
Blue ................Adjusts a white balance

respectively.

Sharpness..........Adjusts picture sharpness.
Gamma ..............Adjusts brightness of darker

part of the picture.

Noise
Reduction ..........Switches noise reduction

on/off.

Progressive Scan....Switches progressive mode.
Auto Picture
Control ................Adjusts picture quality automat-

ically.

Save Adjustment ....Select a mode to store the

image adjustment values.