SATO WEP Leaflet

www.satoamerica.com

All SATO Industrial Printers use Plug-In Interface 

Cards for maximum flexibility. They can be easily 

changed in the field in a matter of seconds to 

accommodate any of the commonly used host 

interfaces.

Standard Centronics 36 Pin (Female)
Transmission Speed: 

Up to 450k bytes per second
Port Type Compatibility: 

ECP/Bi-Directional compatible
Printer Cable Type:  

IEEE1284 Compliant Parallel  

(Cable not included)
Max. Printer Cable Length:  

10 feet (3 meters)

Standard DB-25S (Female)
Settings via dip switch on the board: 

Baud Rates: 9600, 19200, 38400, 57600
Communication Protocols:  

Ready/Busy, Xon/Xoff, SATO Status 2, 3 and 4
Printer Cable Type:  

NULL MODEM cable when connected to a  

standard PC RS232C port. (Cable not included)
Max. Printer Cable Length:  

50 feet at up to 19,200 baud rate. Determined by cable quality 

and baud rate. Refer to the ANSI/EIA RS232C spec for more info

2 Standard DB-9 (Female); Supports Multi-Drop of up to  

32 printers
Settings via dip switch on the board: 

Baud Rates: 2400, 4800, 9600, 19200 

Parity: ODD, EVEN, NONE 

Stop Bits: 1 or 2 / Data Bits: 7 to 8
Communication Protocols:  

Ready/Busy, Xon/Xoff, SATO Status 3
Printer Cable Type:  

RS422/485 Standard Cable  

(Cable not included)
Max. Printer Cable Length:  

3,900 Feet

USB Type B
Transmission Speed: 

1.5 Mbps
Printer Cable Type:  

USB Type A Male to USB Type B Male  

(Cable not included)
Max. Printer Cable Length:  

10 feet (3 meters)

*Factory Installation Required