Sanyo POA-PN40 User Manual
33
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
E-mail setting
2
Registering and deleting E-mail addresses
Click "Add e-mail address" and type the e-mail
address onto the text box and click Set button. To
check the registered addresses, click Check/Delete
sub menu tab. The addresses are listed as the figure
on the right.
address onto the text box and click Set button. To
check the registered addresses, click Check/Delete
sub menu tab. The addresses are listed as the figure
on the right.
✐
Up to 10 E-mail addresses can be registered.
To delete the registered addresses, check the address
you want to delete and click Delete button.
you want to delete and click Delete button.
3
Option selection for sending alert mail
Click Option sub menu tab. Check the condition
items under which alert mail will be sent and click
Set
items under which alert mail will be sent and click
Set
button.
Please refer to item "Examples :Type and contents of
alert mail" described on the next page.
alert mail" described on the next page.
Check / Delete
Option
[1]–––––––––––––––––––––––––––––––––––
❏
❏
When PJ lamp is off.
❏
When the life span of lamp is reached.
❏
When internal PJ power circuit is failed.
❏
When internal PJ temperature is too high.
❏
When PJ is turned off with power ON/OFF button.
[2]–––––––––––––––––––––––––––––––––––
❏
❏
When Power management function turns PJ
lamp off.
❏
When the signal is interrupted.
[3]
–––––––––––––––––––––––––––––––––––
❏
When lamp Corres. Value reaches [ ] hours.
Attached message
✐
The length of message should be less
than 256 characters.
than 256 characters.
✐
Up to 99,999 hours can be set for use time.