Sanyo POA-PN40 User Manual

PJ-NET ORGANIZER

OWNER'S MANUAL

When  communication  is  established,  the  word  "PASSWORD:"  appears  on  the 

window. Type  the  login  password  (PIN  code)  for  the  projector  and  then  press 
"Enter" key on the keyboard. If you do not set up the network PIN code, just press 
"Enter" key.

When the word "Hello" is replied, login has been succeeded.

 

Type the commands from the key board to control the external equipment and then 

press  "Enter"  key  for  termination.  For  example,  type  "C00"  and  press  "Enter"  key. 

* "C00" is a command to turn the projector on.

 

- The extra projector will be turned on. 

To disconnect the communication, press "Ctrl" key and "]" key at the same time.

*1  Further instructions about the telnet application, please see the on-line guide on your com-

puter.

*2  The commands are defined by each product independently, so please consult the manufac-

turer or sales dealer for further information of the commands.

*  The password is a network PIN code decided item "Network PIN code setting" (☞P.20, 29). If 

the authentication of the entered password is failed 4 times continuously, the communication 

will be disconnected automatically. Please try again for the connection.