Sonance CB2Z User Manual

Pg 4

Fig. 5: Using a

ACB1

for Emitter Expansion

33-1891 4.02

CAUTION:

Because the Z O N E and C O M M O N jacks on the

CB2Z

are connected in series, you must

have an emitter(s), a connecting block (with emitters), or other Sonance IR controlled

device plugged into the COMMON jack for the zone emitters to operate! This is true

for the ZONE OUTPUT jacks as well.

M O U N T I N G

The

CB2Z

can be conveniently mounted to a wall or shelf by using screws or mounted into 3”

SNAPTRACK

CAUTION:

Because the Z O N E and C O M M O N jacks on the

CB2Z

are connected in series, you must

have an emitter(s), a connecting block (with emitters), or other Sonance IR controlled

device plugged into the COMMON jack for the zone emitters to operate! This is true for the

ZONE OUTPUT jack as well.

Fig. 5, below, illustrates an

ACB1

driving six emitters for control of six common components. Up

to 10 single or 10 dual emitters may be driven directly from the

ACB1

SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672