Schneider Electric AP9630 User Manual
UPS Network Management Card 2 User’s Guide
2
Devices in which you can install the Network Management Card 2.
The NMC can be installed in:
• Any Smart-UPS
®
model that has an internal expansion slot, or any Symmetra
®
UPS except the
Symmetra PX 250 or Symmetra PX 500 UPS
• MGE
®
Galaxy
®
300, 3500, or 7000
• Expansion Chassis (AP9600)
• Triple Expansion Chassis (AP9604)
IPv4 initial setup
You must define two TCP/IP settings for the NMC before it can operate on the network:
• IP address of the NMC
• IP address of the default gateway (only needed if you are going off segment)
Caution: Do not use the loopback address (127.0.0.1) as the default gateway. Doing so disables the
card. You must then log on using a serial connection and reset the TCP/IP settings to their defaults.
card. You must then log on using a serial connection and reset the TCP/IP settings to their defaults.
To configure the TCP/IP settings, see the Network Management Card Installation Manual,
available on the Network Management Card Utility CD and in printed form.
For detailed information on how to use a DHCP server to configure the TCP/IP settings at an NMC,
see “TCP/IP and Communication Settings” on page 54.
see “TCP/IP and Communication Settings” on page 54.
IPv6 initial setup
IPv6 network configuration provides flexibility to accommodate the user's requirements. To configure the
TCP/IP settings for IPv6, see the user interface online help for details on the options:
TCP/IP settings for IPv6, see the user interface online help for details on the options:
Manual
,
Auto
Configuration
,
DHCPv6 Mode
under this menu:
Administration
>
Network
>
TCP/IP
>
IPv6 settings
.
Network management features
These applications and utilities work with a UPS that connects to the network through an NMC.
• PowerChute Network Shutdown — Provide unattended remote graceful shutdown of computers that
are connected to UPS devices
• PowerNet
®
Management Information Base (MIB) with a standard MIB browser — Perform SNMP
SETs and GETs and use SNMP traps
• InfraStruxure Central — Provide enterprise-level power management and management of agents, UPS
devices, and environmental monitors.
• Device IP Configuration Wizard — Configure the basic settings of one or more NMCs over the
network
• Security Wizard — Create components needed for high security for the NMC when you are using
Secure Sockets Layer (SSL) and related protocols and encryption routines