Siemens 2000592-001 User Manual

Periodically we will provide our users with firmware upgrades. Perform 
the following instructions to download a new firmware upgrade to the 
Communications board ANCB. A firmware upgrade will take 
approximately 5 minutes.  

 

The following procedure assumes that the HyperTerminal program is 
residing on your PC and has been configured.  

1.  Connect a standard 9-pin COM cable from the PC COM port to 

RS232 connector located on the ANCB/DN board.  

2.  Open HyperTerminal program on your PC; reference Configuring 

Your PC, page 22. 

3.  Connect and Log on to the Maxum. 

4. At 

the 

> prompt type: download 

You should see the following response on the screen. At this point 
the ANCB is ready to receive the new firmware version. 

 

5.  From the Main Menu bar click on Transfer. 

•  33