Sierra Wireless AirCard 710 User Manual
AirCard 710/750 Network Card Installation Guide
6
2130135
SIM card overview
Note: If you change GSM
service providers (such as if you
move to a new city), you will
need a new SIM card from your
new service provider. You will
also need to enter your new
profile information into the
Watcher software (see “Config-
uring Your Account” on page 23).
service providers (such as if you
move to a new city), you will
need a new SIM card from your
new service provider. You will
also need to enter your new
profile information into the
Watcher software (see “Config-
uring Your Account” on page 23).
Inserting a SIM card
To install your SIM card into the AirCard 710/750 network
card, follow these steps:
card, follow these steps:
1.
Hold the AirCard 710/750 network card with the label on
top and the antenna closest to you.
top and the antenna closest to you.
2.
Locate the thin SIM card slot on the left side of the AirCard
PC Card’s antenna end.
PC Card’s antenna end.
3.
Orient the SIM card, as shown in the diagram on the
bottom side of the AirCard.
bottom side of the AirCard.
4.
Insert the end of the SIM card into the slot, and gently
push it until it clicks into place.
push it until it clicks into place.
Figure 2-1: Inserting the SIM card Into the AirCard 710/750 SIM card slot
5.
Once the SIM card is properly inserted, it should not
extend beyond the end of the card. See Figure 2-2.
extend beyond the end of the card. See Figure 2-2.
Figure 2-2: A SIM card properly inserted
Removing a SIM card
To remove the SIM card, you will need a slim object, such as
the tip of a pen or a straightened paper clip, to push into the
eject hole.
the tip of a pen or a straightened paper clip, to push into the
eject hole.