Sony Ericsson GC79 User Manual
Appendix D- Initiating a HSCSD Connection from Outside the Wireless Manager
85
Appendix D- Initiating a HSCSD Connection from
Outside the Wireless Manager
Outside the Wireless Manager
The HSCSD speed is normally entered in the Wireless Manager Connection Wizard. The specified
speed is requested when the Connect button is pressed in the Status screen of the Wireless Manager.
speed is requested when the Connect button is pressed in the Status screen of the Wireless Manager.
In exceptional cases you may need to initiate an HSCSD call from outside the Wireless Manager
(for example, Safe Removal of the GC79 on page 39 and Connection on page 30) the HSCSD speed
must be specified by placing additional commands in the GC79 Wireless Modem properties.
(for example, Safe Removal of the GC79 on page 39 and Connection on page 30) the HSCSD speed
must be specified by placing additional commands in the GC79 Wireless Modem properties.
Note:
GC79 Wireless Modem properties settings will override any settings for connections initiated
from the Wireless Manager.
from the Wireless Manager.
1. To access the GC79 Wireless Modem properties, select Start
Settings
Control
Panel
Phone and Modem Options.
2. Select the Modems tab.
3. Select the Sony Ericsson GC79 Wireless Modem and click Properties.
4. Click the Advanced tab and enter the HSCSD setting into the Extra initialization commands: field.
5. To set the connection to analog 28.8 place +CBST=7,0,1;+CHSN=4,0,0,12 in this field, Click OK.