Toshiba e-STUDIO16 User Manual
1
2
3
4
5
6
7
9
10
11
12
8
8-2
USER TEST MODE
AUTO TEST
1. AUTOMATIC TEST MODE
AUTO TEST mode, permits you to automatically perform a series of copier tests in one operation.
The test items performed by the AUTO TEST are:
• FLASH ROM TEST
Checks the program data, function data, and language data.
• SRAM TEST
Checks the SRAM memory.
• DRAM TEST
Checks the DRAM memory
• MODEM TEST (Only when optional FAX kit is installed)
Checks the modem and detects line current.
• SCANNER TEST
Checks the image scanner.
• CODEC TEST
Checks the CODEC IC.
• PRINTER TEST
Checks the printer components for proper operation and prints one test page.
• PHONE BOOK DATA TEST (Only when optional FAX kit is installed)
Checks the phone book data.
• PCL BOARD TEST
Checks the optional PCL print kit.
Note
AUTO TEST cannot be performed if image data is stored in the memory.
1
Press the
key to enter the program menu.
2
Select “05.TEST MODE” and press the
key.
3
Select “01.AUTO TEST” and press the
key.
• “Auto Test” appears on the screen indicating that the test is
under way.
• When all the tests end, the word “Completed” is displayed
on the screen.
• The results of the auto test can be confirmed with the self
test report.
Page 8-12
• If the result of the auto test is judged to be NG, call your
service representative.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
AUTO TEST
-----------------------------