Toshiba e-STUDIO16 User Manual
4-25
1
2
3
4
5
6
7
9
10
11
12
8
9. JOB BUILD
This function allows up to five sets of originals to be scanned and stored separately and then to be
copied and output all at once.
copied and output all at once.
1
Press the
key on the control panel while in the
initial screen for copying. The "EDIT MENU" screen
appears.
2
Press the
key to display the "JOB BUILD."
Then press the
key.
3
Press the
key to display the "ON." Then press
the
key.
4
The "JOB BUILD: ON" screen appears. Press the
key to return to the initial screen for copying.
5
Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
6
Place the original on the glass or feed tray and press
the
key.
7
After the original is scanned, the screen on the right
appears.
• When scanning the next original without changing any
settings, place it on the glass or feed tray and select "Scan
next page." Then press the
key.
• In scanning the next original, if the scan density and Edge
Erase settings are changed, select "Change current
settings" to change the settings. Then press the
key.
• When all originals have been scanned, select "End job build"
to start copying automatically. Then press the
key.
JOB BUILD
1
Scan next page
End job build
Change current setting
Scanning in memory
1
Scanning Page
:XXX
READY
1
ANNOTATION
:OFF
EDITING
:OFF
JOB BUILD
:ON
JOB BUILD
1
OFF
ON
READY
1
ANNOTATION
:OFF
EDITING
:OFF
JOB BUILD
:OFF
Note
To select the paper cassette, press the
key, select AMS
and then select the desired paper cassette.