Panasonic WV-CU650 User Manual

Note: To return the cursor to the previous item, rotate

the shuttle ring counterclockwise or move the 3D
joystick to the left.

5. Press the F1 button.

Camera cleaning will be cleared from the first to the last
camera you have set.
During the cleaning, the current channel number will be
displayed on the LCD.

When the all cameras have started to be cleaned,
“End” will appear on the LCD.

Notes:

• To quit the cleaning, press the F2 button.
• It may take a few minutes since “End” appears on

the LCD until camera cleaning ends.

• If you have selected a lower channel for the last

camera than the first camera, “Invalid” will appear
on the LCD.

In this case, select a higher camera channel for the
last camera.

● Time & Date Search Display Pattern

You can set up the clock display pattern of the LCD for the
time & date search. You can select a desired one from 10
patterns.

1. Display “Time & Date Type” sub menu. (Refer to Step 1

to 4 of p. 51 To Recall Menu Functions.)

2. Select a desired display pattern by performing either of

the following.

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.

The following patterns are available.

3. Press the F1 button.

• The still mode will be activated for the selected

camera channel.

• The specified camera channel will blink on the LCD

for a few seconds, and the LCD display will return
to Step 1.

Note: To return the multiscreen monitor display from the

still mode to moving mode, perform Step 1 to 3
again.

■ Controller Functions

● Camera Cleaning

1. Display “Camera Cleaning” sub menu. (Refer to Step 1

to 4 of p. 51 To Recall Menu Functions.)

2. Select the camera to clean first by performing one of

the following.

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the camera number with the numeric buttons.

3. Rotate the shuttle ring clockwise or move the 3D joy-

stick to the right. The cursor will jump to the next item.

4. Select the camera to clean last by performing one of

the following.

• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the camera number with the numeric buttons.

Invalid

Camera Cleaning 401

Start Cancel 003-256

Camera Cleaning 401

Start Cancel 003-064

Camera Cleaning 401

Start Cancel Cam028

Time&Date Type 402

Mmm/DD/YYYY HH:MM 12

Camera Cleaning 401

Start Cancel End

Time&Date Type 402

DD/MM/YYYY HH:MM 24

Mux Still 305

Still CH=__9

Camera Cleaning 401

Start Cancel 001-256

Mux Still 305

Still CH=All