Panasonic BL-PA300A User Manual

Page of 56
14
Installation
Connecting adaptors to network devices
Once you have placed the adaptors where you plan to use them and are 
satisfied with the network speed test results for your terminals (see 
page 15), follow the procedure below to connect your adaptors to your 
network devices (broadband router, hub, computer, network printer, network 
camera, etc.). This will integrate your 
HD-PLC
 network with your home 
network.
1.
Confirm that each adaptor is plugged in correctly to the wall outlet.
Do not plug adaptors in upside-down (i.e., with the LAN jack 
facing up).
2.
Connect a LAN cable to each adaptor’s LAN jack.
The LAN indicator of each adaptor turns green.
If an adaptor’s LAN indicator does not turn green, see page 19.
3.
Connect the other end of each LAN cable to a network device.
Up to 16 adaptors can be connected to the same network. If a 
hub is used, up to 8 devices can be connected to each adaptor.
Avoid connecting more than one adaptor to the same hub or 
router.
You are now ready to use your computers, network printers, network 
cameras, etc.
BL-PA300A_OI.book  Page 14  Wednesday, August 6, 2008  9:59 AM