Panasonic FT-LB10NTU User Manual

56

The projector
cannot be located
on the connection
list of Wireless
Manager ME.

• Right-click an empty location on the desktop and select

[Properties]. Then, open the [Settings] tab of the [Display
Properties] window and set [Color quality] to [Medium (16 bit)]
or higher.

The Wireless
Manager ME color
display is strange
and characters are
difficult to read.

(cont.)

• Check if the computer and the projector are located too far

apart, or if some object is obstructing the radio waves.

• Check that the IP address and the subnet mask are set

correctly.

• Is TCP/IP installed in the computer?
• Does the WEP setting match with the projector?

Communication is not possible if the WEP function is set
when using a wireless card other than the optional card or
when using an access point. In these cases turn off the WEP
function.

• In [Infrastructure] mode, set the same [SSID] for the projector

and the computer as that of the access point used. The
[SSID] uses alphanumeric characters (case sensitive). In
addition, check that the computer control function that allows
communication with access points is disabled.

• In [802.11 AdHoc (Peer to Peer)] mode, set the same SSID

for the projector and the computer. The SSID is case
sensitive.

• Is a network device other than the wireless card enabled?

Check the Windows Device Manager.

• Is proxy-client software active? Disable this software when

communicating with the projector.

• Are you running a security program that contains a personal

firewall function? Before communicating data using the
projector, either close the software or set up an exemption.