Panasonic KX-HGW200 User Manual
18
“
Setup
To connect an Ethernet Hub to the KX-HGW200:
If you are not currently using an Ethernet hub to network more than one
computer, please skip this page.
computer, please skip this page.
1
Make sure the computers and other devices connected to the Ethernet
Hub are turned off.
Hub are turned off.
2
Set the HUB/PC switch of the KX-HGW200 to HUB.
3
Connect the category 5 straight cable to
TO COMPUTER/ETHERNET HUB port of the KX-HGW200.
TO COMPUTER/ETHERNET HUB port of the KX-HGW200.
4
Connect the other end of the category 5 straight cable to the LAN port
of the Ethernet Hub.
of the Ethernet Hub.
HUB/PC switch
HUB
PC
To RJ-45 jack
on the cable/
xDSL modem
on the cable/
xDSL modem
TO COMPUTER/
ETHERNET HUB port
ETHERNET HUB port
Category 5
straight cable
straight cable
Ethernet Hub
LAN port
Note:
Do not connect the category 5 straight cable to the UPLINK port of the
Ethernet Hub.
Do not connect the category 5 straight cable to the UPLINK port of the
Ethernet Hub.
Note:
If using an Ethernet connection, an Ethernet card and software have
to be installed properly on the computer first.
If using an Ethernet connection, an Ethernet card and software have
to be installed properly on the computer first.
PQQX12817ZA \1-P29
01.3.8
3:17
PM
y [ W 18