Panasonic TY-FB10WPE User Manual
54
Glossary
Category
Item
Descriptions
Page
Common
Setting of
connections
Setting of
connections
LAN
Abbreviation for Local Area Network. This is a network with a relatively
narrow range such as inside a company.
narrow range such as inside a company.
10
Access point
These are stations for relaying electromagnetic signals between
computers in a wireless LAN. When a computer is connected to an
access point, it can communicate through the network connected to the
access point.
computers in a wireless LAN. When a computer is connected to an
access point, it can communicate through the network connected to the
access point.
51
TCP/IP
Abbreviation for Transmission Control Protocol/Internet Protocol. This is
the standard internet protocol.
This protocol is a set of rules and agreements governing data
communications between computers.
the standard internet protocol.
This protocol is a set of rules and agreements governing data
communications between computers.
52
IP address
Internet Protocol (IP) is a protocol for distributing data, and the address
corresponding to the data distribution destination is called the IP
address. The same IP address cannot be used within the same LAN.
corresponding to the data distribution destination is called the IP
address. The same IP address cannot be used within the same LAN.
20/
45/
45/
51
DHCP
Abbreviation for Dynamic Host Configuration Protocol. This function
automatically assigns IP addresses to the connected equipment. If
a device with the DHCP server function is present within a LAN, it
automatically assigns IP addresses to the connected equipment.
automatically assigns IP addresses to the connected equipment. If
a device with the DHCP server function is present within a LAN, it
automatically assigns IP addresses to the connected equipment.
45/
51
Subnetmask
This limits the range of the IP addresses assigned to computers in
order to divide the network into a number of sections during TCP/IP
connection. The value used to divide the network at this time is called
the subnetmask.
order to divide the network into a number of sections during TCP/IP
connection. The value used to divide the network at this time is called
the subnetmask.
45/
51
Gateway
This is a relay point for connecting different networks.
This refers to the hardware and software used when connecting a
network with a network that uses a different protocol, etc. It adjusts the
protocol and other differences between networks to allow connection
with other networks.
This refers to the hardware and software used when connecting a
network with a network that uses a different protocol, etc. It adjusts the
protocol and other differences between networks to allow connection
with other networks.
45