TP-LINK TL-WN620G User Manual

mode of the access point with which it associates. 

¾ 

Wireless Mode when Starting an Ad Hoc Network - Specifies Super G or 2.4 GHz 

54/11 Mbps to start an ad hoc network if no matching network name is found after 

scanning all available modes. This mode also allows the selection of the channel the 

wireless adapter uses.   The channels available depend on the regulatory domain. If 

the adapter finds no other ad hoc adapters, this selection specifies which channel 

the adapter starts the ad hoc network with. The wireless adapter must match the 

wireless mode and channel of the clients it associates. 

¾ 

802.11 Authentication Mode - Select which mode the wireless adapter uses to 

authenticate to an access point: 

• 

Automatic causes the adapter to attempt authentication using shared, but switches it to 

open authentication if shared fails. 

• 

Open System enables an adapter to attempt authentication regardless of its WEP settings. It 

will only associate with the access point if the WEP keys on both the adapter and the access 

point match. 

• 

Shared-Key  only allows the adapter to associate with access points that have the same 

WEP key.

 

For infrastructure (access point) networks, click Preferred APs… to specify up to 

four access points to the client adapter that attempts to be associated to the access 

points. 

 

Figure 3-7    Advanced tab of Profile Management 

1.  Go to the Profile Management tab. 

2.  Select the profile to remove from the Profile List. 

3. Click 

Remove. 

1.  Go to the Profile Management tab. 

 

 

- 13 -