Sony STRDG720 User Manual
27
GB
Getting Star
ted
6: Preparing the receiver
and the remote
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
display alternately.
3
Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
(mains lead)
NT B
FRONT A
L
L
R
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
operations
?/1
AUTO CAL MIC
SPEAKERS
(OFF/A/B)
PHONES
VIDEO 2 IN/PORTABLE AV IN
VIDEO
L AUDIO R
MEMORY/
ENTER
SUR BACK
DECODING
DECODING
DIMMER
SLEEP
TUNING
2CH
A.F.D.
MOVIE
MUSIC
ANALOG
DIRECT
MUTING
DISPLAY
INPUT MODE
INPUT SELECTOR
TUNING MODE
MASTER VOLUME
1,2
3