Philips Sdw1850/17 User Manual
WARNING
INSTALLATION OF THIS PRODUCT NEAR POWER LINES
IS DANGEROUS. FOR YOUR SAFETY, KEEP LADDER AND ANTENNA
AWAY FROM POWER LINES. CONTACT MAY CAUSE ELECTROCUTION.
AWAY FROM POWER LINES. CONTACT MAY CAUSE ELECTROCUTION.
Antenna Grounding and Safety Warning
1. Outdoor antennas and lead-in conductors from antenna to a building, should
not cross over open conductors of electric light of power circuits.They should
be kept away from all circuits to avoid the possibility of accidental contact.
be kept away from all circuits to avoid the possibility of accidental contact.
2. Each conductor of a lead-in from an outdoor antenna should be connected
with an antenna discharge unit. Antenna discharge units (or Lightning
Arrestors) should be located outside the building or inside the building
between the point of entrance of the lead-in and the TV, and as near as prac-
tical to the entrance of the conductors to the building.
Arrestors) should be located outside the building or inside the building
between the point of entrance of the lead-in and the TV, and as near as prac-
tical to the entrance of the conductors to the building.
Product Description
The rotator is designed to turn and accurately position even large antennas,
allowing best possible reception. Rotation of the rotator unit is synchronized
with commands from the indoor control unit to automatically go to up to 12 dif-
ferent memorized positions or any direction chosen manually. The connecting
cable between the control unit and the rotator unit carries only safe, low volt-
age power.When the operating command sequence is finished, the unit shuts off
automatically and draws no current until activated by a remote or manual com-
mand to the control unit.
allowing best possible reception. Rotation of the rotator unit is synchronized
with commands from the indoor control unit to automatically go to up to 12 dif-
ferent memorized positions or any direction chosen manually. The connecting
cable between the control unit and the rotator unit carries only safe, low volt-
age power.When the operating command sequence is finished, the unit shuts off
automatically and draws no current until activated by a remote or manual com-
mand to the control unit.
EN
Safety Instructions
3
IIM
MP
PO
OR
RT
TA
AN
NT
T
R
RE
EA
AD
D
B
BE
EF
FO
OR
RE
E
IIN
NS
ST
TA
AL
LL
LA
AT
TIIO
ON
N