Tripp Lite U244-001-R Leaflet

Quick Start Guide

USB to VGA/DVI

Adapter

Model: U244-001-R

arranty

Registration:

chance to win a FREE T

ripp Lite

product—www

.tripplite.com/warranty

Note: This Quick Start Guide contains only basic

installation instructions. For more detailed instructions,

reference the Owner’s Manual on the CD.

Equipment Connection Warning: Use of this equipment in life support

applications where failure of this equipment can reasonably be expected to

cause the failure of the life support equipment or to signifi cantly affect its safety or

effectiveness is not recommended. Do not use this equipment in the presence of

a fl ammable anesthetic mixture with air, oxygen or nitrous oxide.

Installing the Driver

Caution: DO NOT connect the adapter to your computer before
installing the driver

Insert the included driver CD into your computer’s CD-ROM drive.
The setup program should run automatically. If not, locate and
double-click the “Setup.exe” fi le in the “Driver” folder on the CD.
Follow the on-screen prompts to complete installation of the driver.

For Windows Vista

users:

• If you encounter the “User Account Control” dialog box upon

installing the driver, either enter the administrator password or click
“Allow” to continue with the installation.

• If you encounter the driver signature dialog box upon installing the

driver, click “Install this driver software anyway” to continue with
the installation.

• Restarting your computer is necessary to successfully install the

driver. When prompted to restart your computer, click “Yes.” If you
are not prompted to restart your computer you should manually
restart it.

For Windows

XP users:

• If you encounter the driver signature dialog box upon installing the

driver, click “Continue Anyway” to continue with the installation.

For Windows 2000 users:

• If prompted for a system patch after starting the “Setup.exe” fi le,

you must download and install the required patch before installing
the driver.

• If you encounter the driver compatibility dialog box upon

installing the driver, click “Yes” to continue with the installation.

• Restarting your computer is necessary to successfully install

the driver. When prompted to restart your computer, click “Yes.”
If you are not prompted to restart your computer you should
manually restart it.

Connecting the USB Cable to the VGA/DVI Adapter

1. Connect the included USB cable from your computer to the

adapter

2. For DVI monitors, connect the adapter to the monitor using a

Tripp Lite P560-Series or P561-Series cable (not included).

For VGA monitors, you must fi rst connect the included DVI to

VGA adapter to the U244-001-R, and then connect the adapter to
the monitor using a Tripp Lite P502-Series or P512-Series cable
(not included). Power on your monitor after connecting it to the
adapter.

3. Windows Vista and Windows 2000 will automatically complete

the installation for you, and the screen from your computer will
be displayed on the add-on monitor. If the screen of the add-on
monitor is blank, restart the computer. Windows XP will display
a “Found New Hardware Wizard.” Follow the steps below to
complete the installation on Windows XP.

their respective owners.

200803171 93-2774 QuickStartGuide_Eng.indd 1

5/2/2008 11:28:49 AM