TROY Group 802.11b User Manual
5. Select
Local Printer
or
My Computer
(not
Network Printer
) when you are
asked how the printer is connected to your computer.
6. You will also need to know the following
- The manufacturer and model of the printer at the remote site (for example,
Hewlett-Packard LaserJet 5). In some cases, you will need to provide a disk
with the appropriate printer driver.
with the appropriate printer driver.
- The name of the PrintraNet port that you defined for the remote
EtherWind print server in step 3 (PNET1 by default).
7. With PrintraNet 2.0, you can also:
- Click on the Address Book button to configure other remote destinations.
This capability lets you send print jobs to more than one destination with-
out having to create a separate printer for each destination.
out having to create a separate printer for each destination.
- Select the partial E-mail printing option to break up the print job into sev-
eral small E-mail messages. This allows PrintraNet to work with mail
servers that restrict the size of incoming E-mail messages.
servers that restrict the size of incoming E-mail messages.
8. Select
No
when asked if you want to print a test page, unless you have already
configured the remote EtherWind print server to receive PrintraNet print jobs.
You have now finished installing the PrintraNet software. If you have only one E-
mail printer, go to Step 2, Configuring the Remote EtherWInd Print Server.
mail printer, go to Step 2, Configuring the Remote EtherWInd Print Server.
Adding a Second PrintraNet Destination
You should not re-run the install program to add a new E-Mail printer port.
Instead, press the Start button, select Settings, and open the Printers window.
Click on the icon of a PrintraNet printer, select
Instead, press the Start button, select Settings, and open the Printers window.
Click on the icon of a PrintraNet printer, select
File
from the menu bar, and then
choose
Properties
. Click on the
Details
tab (or
Port
s tab) and push the
Add
Port
button.
In the
Add Port
dialog, select the
Other
radio button and then "PrintraNet
Port". Click on
OK
and it will give you the Port Name dialog (like in the install
program). Any unique name can be given here as long as it starts with "PNET"
and another port does not already exist with the same name. Then enter the port
settings as described in step 3 of the Installing the Software on a Windows PC at the
Local Site section.
and another port does not already exist with the same name. Then enter the port
settings as described in step 3 of the Installing the Software on a Windows PC at the
Local Site section.
10-3