Pioneer DRM-6NX User Manual
<DRB1239>
13
Basic Installation
This section includes the basic setup procedures for
getting your PIONEER Network Cache Changer DRM-
6NX up and running:
÷ Connecting the DRM-6NX to the network
getting your PIONEER Network Cache Changer DRM-
6NX up and running:
÷ Connecting the DRM-6NX to the network
÷ Assigning an Internet address
÷ Setting basic system parameters
You must configure the DRM-6NX and set up the
appropriate access restrictions for your specific network
environment. Proceed to the relevant sections of the
manual:
÷ pp. 18 – 19 - Microsoft & IBM Networks (SMB)
You must configure the DRM-6NX and set up the
appropriate access restrictions for your specific network
environment. Proceed to the relevant sections of the
manual:
÷ pp. 18 – 19 - Microsoft & IBM Networks (SMB)
÷ pp. 20 – 24 - NetWare (NCP)
÷ pp. 25 – 26 - UNIX (NFS)
÷ pp. 27 – 28 - Web (HTTP)
Connecting the Network Cache Changer to
the Network
the Network
Before you begin
Always consult the Network Administrator before
making changes to the network configuration.
making changes to the network configuration.
Procedure
To connect the DRM-6NX to your network, follow these
steps:
steps:
1. Turn off the power
2. Connect the network cable to the appropriate
2. Connect the network cable to the appropriate
connector
3. Turn on the power
The DRM-6NX front panel indicators will flash during
power-on and self-test. When the Status indicator stops
flashing and remains off, the DRM-6NX is ready for use.
power-on and self-test. When the Status indicator stops
flashing and remains off, the DRM-6NX is ready for use.