Pioneer DRM-6NX User Manual

<DRB1239>

49

3. Release the Reset button and wait at least two

seconds (one flash of the Network indicator)

4. Press and hold the Reset button for at least five

seconds until the Network indicator remains
constantly lit

5. Turn off the DRM-6NX then back on again

The factory default setting are now restored.

To restore the default settings using the Reset button:

1. Turn off the DRM-6NX
2. Press and hold the Reset button while you switch on

the DRM-6NX (continue to press the 'Reset' button 
until  the Network  indicator  flashes at  regular two-
second intervals.

7 When some 100Base switching HUBs are used,

Collision LEDs may light at 3-second intervals. This
is normal behavior and may be ignred.

7 With some HUBs, the Link LED may not light.  Reseat

the cable until this LED light is on.

7 If a 'write error on hard drive' mesage is returned

during caching,  re-format the drive with a  low-level
 format   (Select Hard Disk on This Server page and
click on the Format button)

7 When mulitple external DRM-6324Xs or other Pioneer

6-Discs Changers are connected, you must not insert
multiple magazines at the same time. Please insert
the next magazine after the caching is complete.

7 If there are problems when using a Web Browser with

an earlier release than Internet Explorer 3.0x, please
upgrade the Web Browser to IE4.0x or an equivalient.

7 Once File Rights (Windows Sharing)  of the root

directory are changed to Not Shared, the shared
name is changed to NoName.  Only restoring the
factory defaults setting or editing the Root.txt  file
will clear this condition.  The Root.txt file is found
in the System/VolumeProperties folder.