Network Technologies ASI-IP-GTW User Manual
ASI-IP-GTW User's Manual
Page
16
o
Where appropriate ensure that this product has an adequate level
of lightning protection. Alternatively, during a lightning storm or
whenever it is left unattended and unused for long periods of time,
unplug it from the supply outlet and disconnect the output
equipment. This prevents damage to the product due to lightning
of lightning protection. Alternatively, during a lightning storm or
whenever it is left unattended and unused for long periods of time,
unplug it from the supply outlet and disconnect the output
equipment. This prevents damage to the product due to lightning
and power-line surges.
2.2.2 To fix the equipment
The ASI-IP-GTW is designed for stationary use. The ASI-IP-GTW is
designed for installation in standard 19" racks. When installed in a
rack, ensure that the unit is surely and safely installed and that the
equipment has adequate through-flow of air.
designed for installation in standard 19" racks. When installed in a
rack, ensure that the unit is surely and safely installed and that the
equipment has adequate through-flow of air.
2.2.3 To cable the equipment
Ensure that power supply cables are routed in such a way that they are
not likely to be walked on or pinched by items placed upon or against
them.
Do not run ac power cables and signal cables in the same duct.
not likely to be walked on or pinched by items placed upon or against
them.
Do not run ac power cables and signal cables in the same duct.
2.2.4 Equipment access
The ASI-IP-GTW has connectors at the rear. When installing the unit,
ensure that the unit is installed to allow easy access to the rear of the
unit.
ensure that the unit is installed to allow easy access to the rear of the
unit.
2.2.5 Ventilation
Please observe the following:
1. Openings in the cabinet are provided for ventilation and to ensure
1. Openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating.
These openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation such as a
rack unless proper ventilation is provided or the instructions have
been adhered to.
These openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation such as a
rack unless proper ventilation is provided or the instructions have
been adhered to.
2. The fans contained in this unit are not fitted with dust/insect filter.
Play particular attention to the environment in which it is to be
used.
The ASI-IP-GTW should be installed to allow adequate flow of free-
air. Ensure that the ventilation holes on each side of the ASI-IP-
used.
The ASI-IP-GTW should be installed to allow adequate flow of free-
air. Ensure that the ventilation holes on each side of the ASI-IP-
Warning: If the Video Gateway has been subject to a lightning strike or
the power surge which has stopped it working, disconnect the power
immediately. Do not reapply power until it has been checked for safety.
If in doubt, contact Network.
the power surge which has stopped it working, disconnect the power
immediately. Do not reapply power until it has been checked for safety.
If in doubt, contact Network.
Warning: Never push objects of any kind into this equipment through
openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of
any kind on or into the product.
openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of
any kind on or into the product.