Network Technologies ASI-IP-GTW User Manual
ASI-IP-GTW User's Manual
Page
41
Type of service (TOS): Enter Type of Service parameter as a byte value
to be set in the Type-of-Service (TOS) field in the IP header as specified
in RFC-791. This parameter is used for Class-of-Service prioritization.
It depends on the Routers honouring this field. Please refer to
“Appendix F: Quality of service – Setting Packet priority” for further
details.
Time to Live (TTL): Enter Time to Live parameter as a byte value to be
set in the Time to Live (TTL) field in the IP header as specified in RFC-
791.
Use multicast router: Click this box, to enable use of multicast router.
The address of the multicast router is the same for the entire unit and
is configured in the Network sub-page of the Device Info page. When
this option is enabled, the MAC address used when configuring a
multicast destination IP address, will be resolved to the IP address of
the multicast router. If not using the multicast router option, multicast
addresses automatically resolve to dedicated multicast MAC addresses.
1.1.1.26 IP TX Status
Resolved: Yes, when the MAC address of the configured IP destination
address is resolved. The parameter is always yes, when multicast is
used without using multicast router. No, when the MAC address is not
yet resolved by ARP lookup.
Destination MAC address: Shows the destination MAC address used for
the stream. This may be the MAC address of the receiving unit or the
gateway if the receiving unit is on another network).
If using a multicast destination IP address without enabling multicast
router, the field shows the multicast MAC address corresponding to the
configured IP address. In the case of multicast router, the MAC
address resolved for the multicast router is shown.
When the address is still not resolved this field displays the value
00:00:00:00:00:00.
Total bitrate: The bitrate of the IP frames containing this MPEG-2
transport stream and any FEC data related to this stream.
Data bitrate: The bitrate of the IP frames containing this MPEG-2
transport stream, excluding FEC information.
Resolved: Yes, when the MAC address of the configured IP destination
address is resolved. The parameter is always yes, when multicast is
used without using multicast router. No, when the MAC address is not
yet resolved by ARP lookup.
Destination MAC address: Shows the destination MAC address used for
the stream. This may be the MAC address of the receiving unit or the
gateway if the receiving unit is on another network).
If using a multicast destination IP address without enabling multicast
router, the field shows the multicast MAC address corresponding to the
configured IP address. In the case of multicast router, the MAC
address resolved for the multicast router is shown.
When the address is still not resolved this field displays the value
00:00:00:00:00:00.
Total bitrate: The bitrate of the IP frames containing this MPEG-2
transport stream and any FEC data related to this stream.
Data bitrate: The bitrate of the IP frames containing this MPEG-2
transport stream, excluding FEC information.