Network Technologies ASI-IP-GTW User Manual
ASI-IP-GTW User's Manual
Page
46
3.7 IP RX
3.7.1 Main
Figure 20 shows the IP RX page. The purpose of this page is to provide
an interface for configuring the different streams to be received by the
unit.
an interface for configuring the different streams to be received by the
unit.
Figure 20. IP RX page
The left part of screen shows a three containing all the DVB ASI
outputs port. To select a port, click that port. The information to the
right of the page is related to the selected port.
outputs port. To select a port, click that port. The information to the
right of the page is related to the selected port.
1.1.1.27 Output Configuration
Enable output: Tick this box to enable an output. If this is not ticked,
you will not send any MPEG-2 transport stream on this ASI output.
The output port will be grey in the status view.
Packet length: This lets you configure the ASI output to transmit 188
or 204 byte transport stream packets. If incoming IP frames contain
204 byte MPEG-2 transport stream packets and the packet length is set
to 188, the last 16 bytes of the 204 byte packets will be discarded. If
incoming IP frames contain 188 byte MPEG-2 transport stream packets
and the packet length is set to 204, the last 16 bytes of the 204 byte
packets will contain the hexadecimal value FF.
Output name: Enter a name reference to an ASI output stream.
Copy of previous port: Every even numbered output includes this
option. Selecting this option makes the port output exactly the same as
the previous port, and no other IP RX options are used.
Enable output: Tick this box to enable an output. If this is not ticked,
you will not send any MPEG-2 transport stream on this ASI output.
The output port will be grey in the status view.
Packet length: This lets you configure the ASI output to transmit 188
or 204 byte transport stream packets. If incoming IP frames contain
204 byte MPEG-2 transport stream packets and the packet length is set
to 188, the last 16 bytes of the 204 byte packets will be discarded. If
incoming IP frames contain 188 byte MPEG-2 transport stream packets
and the packet length is set to 204, the last 16 bytes of the 204 byte
packets will contain the hexadecimal value FF.
Output name: Enter a name reference to an ASI output stream.
Copy of previous port: Every even numbered output includes this
option. Selecting this option makes the port output exactly the same as
the previous port, and no other IP RX options are used.