Network Technologies ASI-IP-GTW User Manual

Page of 93
ASI-IP-GTW User's Manual 
 
 Page 
70 
6  Preventive Maintenance and Fault-finding 
6.1  Introduction 
This chapter provides the schedules and instructions, where applicable, 
for routine inspection, cleaning and maintenance of the ASI-IP-GTW to 
be carried out by the operator of the unit. 
6.2  Preventive Maintenance 
6.2.1 Routine Inspection 
1.1.1.35 Cooling fans 
This equipment must never be used unless all the cooling fans are 
working. They should be checked when the unit is switched on and 
periodically thereafter. 
6.2.2 Cleaning 
Remove power from the unit. 
Clean the external surfaces of the ASI-IP-GTW with a soft cloth 
dampened with a mixture of mild detergent and water. 
Make sure that the unit is completely dry before reconnecting it to 
a power source. 
6.2.3 Servicing 
1.1.1.36 Damage requiring service 
Unplug the unit from the power and refer servicing to qualified 
personnel under the following conditions: 
The power supply cord or plug is damaged 
Liquid has been spilled or objects have fallen into the product 
Product has been exposed to rain or water 
Product does not operate normally by following the operating 
instructions 
Product has been dropped or has been damaged 
Product exhibits a distinct change in performance 
6.3  Maintenance 
6.3.1 Warranty 
The ASI-IP-GTW is covered by standard Network warranty service for a 
period of 12 months from delivery. 
Warning: Do not attempt to service this product as opening or 
removing covers may expose dangerous voltages or other hazards. Refer 
all servicing to service personnel who have been authorised by Network.