Network Technologies ASI-IP-GTW User Manual
ASI-IP-GTW User's Manual
Page
85
Limits for the harmonic current
emission.
emission.
EN 50082-1
European
Generic Immunity Standard Part 1:
Domestic, commercial and light
industry environment.
Domestic, commercial and light
industry environment.
FCC
US
Conducted and radiated emission
limits for a Class A digital device,
pursuant to the Code of Federal
Regulations (CFR) Title 47-
Telecommunications, Part 15: radio
frequency devices, subpart B –
Unintentional Radiators.
limits for a Class A digital device,
pursuant to the Code of Federal
Regulations (CFR) Title 47-
Telecommunications, Part 15: radio
frequency devices, subpart B –
Unintentional Radiators.
8.9.3 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
directives:
o
89/336/EEC of 3 May 1989 on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
the Member States relating to electromagnetic compatibility.
o
73/23/EEC of 19 February 1973 on the harmonisation of the laws
of the Member States relating to electrical equipment designed for
of the Member States relating to electrical equipment designed for
the use within certain voltage limits.
o
1999/5/EC of March 1999 on radio equipment and
telecommunication terminal equipment and the mutual
telecommunication terminal equipment and the mutual
recognition of their conformity.
o
8.9.4 Interface to “public telecommunication system”
The equipment is not constructed for electrical connection directly to a
"public telecommunication system". None of the signals shall be
connected directly from the unit to a "public telecommunication
system" leaving the building without using some kind of interface in
between such as a telecom terminal, switch or similar unit. Such kind
of buffer is required to achieve a protective electrical barrier between
the "public telecommunication system" and the unit. This electrical
barrier is required to achieve protection against lightening or faults in
nearby electrical installations.
"public telecommunication system". None of the signals shall be
connected directly from the unit to a "public telecommunication
system" leaving the building without using some kind of interface in
between such as a telecom terminal, switch or similar unit. Such kind
of buffer is required to achieve a protective electrical barrier between
the "public telecommunication system" and the unit. This electrical
barrier is required to achieve protection against lightening or faults in
nearby electrical installations.